Lubricants for Aluminum
Note: If you do not find the lubricant you are looking for here, please call us
and we can cross-reference the applicable lubricant.
We at United Oil company welcome any questions and/or opportunity to design
& manufacture lubricants to your specifications.
Please wait a moment while web page loads………..
|
Operation: |
Product Type |
Brief Description |
Product Name |
|
|
|
|
|
|
Hot rolling reversing mill: breakdown of sheet |
non-soap based Semisynthetic emulsifiable |
Extends roll life Controls oxide build up enhancing the surface quality of the work piece improving subsequent rolling operations |
United S-3 |
|
Hot rolling reversing mill: breakdown of sheet |
soap based Semisynthetic emulsifiable |
Versatile: coolant is prepped for differences in rolling various alloys on the same mill |
United R-1 United RS-7 |
|
Hot rolling tandem mill: rolling of sheet |
soap based Semisynthetic emulsifiable |
Versatile: coolant is prepped for differences in rolling various alloys on the same mill |
United S-4 |
|
Cold rolling Additive |
Primary linear alcohol and ester based |
Heavy reductions at low concentrations |
United X-850 |
|
Cold rolling additive |
Primary branched alcohol and ester based |
Ease of handling. |
United 5430 |
|
Cold rolling additive |
Primary linear alcohols and Lauric acid based |
Foil rolling |
United 5585 |
|
Cold rolling additive |
Ester Based |
Foil rolling |
United Aluroll 100 |
|
Non- Staining Hydraulic Oils |
Polymer based |
Minimizes staining on the work piece during subsequent annealing when Hydraulic oil is leaked into the coolant system |
NS HO 150 (ISO 32) NS HO 225 (ISO 46) NS HO 325 (ISO 68) |
|
Non- Staining Bearing Oils |
Polymer based |
Minimizes staining on the work piece during subsequent annealing when Bearing oil is leaked into the coolant system |
NS BO 2150 NS BO 2300 NS BO 2500 |
|
Non- Staining Bearing Oil Thickner Fluid 3917 |
Polymer based |
Coolant leaking into the bearing oil system, if not corrected, will reduce bearing oil viscosity to the point of bearing failure. Additions of BTF 3917 to correct the viscosity decrease prevents discarding the total oil contents of the system. |
United BTF 3917 |
|
Non- Staining Mist Oils |
Polymer based |
Minimizes staining on the work piece during subsequent annealing when Mist oil or gear oil is leaked into the coolant system |
NS EP 7 NS EP 10 NS EP 15 NS EP 21 NS EP 25 NS EP 31 |
|
|
|
|
|
|
Hot Rolling breakdown for Rod |
non-soap based Semi-synthetic emulsifiable |
Requires no tank side adjustments Extends roll life Controls oxide build up enhancing the surface quality of the work piece thereby improving subsequent drawing operations |
United X5015 |
|
|
|
|
|
|
Cold drawing of Wire |
Semi-synthetic premium fluids compounded with lubricity additives and antioxidants |
Excellent ease of flow on cold start-ups. Superior filterability and die life Reduces the occurrences of flash fires |
|
|
|
|
Heavy gauge Rod reduction |
Unidraw 32A-25 |
|
|
|
Intermediate gauge reduction |
Unidraw 5194 |
|
|
|
Fine Wire |
Unidraw 5372 70/80S |
|
|
|
Fine Wire FDA Approved |
Unidraw 5577 |
|
|
|
|
|
|
Coating Fluids |
Mineral oil based protective coating fluid. |
Protects against water stain and prevents scratches. |
United PCO 5377 |
|
|
Synthetic Non-Staining protective coating fluid. |
Protects against water stain and prevents scratches. Subsequently annealed, coated aluminum displays markedly lower stain ratings after anneal than conventional mineral oil based coatings. |
United 816CM |
Home History Lubricants for Steel Products Contact